Overview of The Standard Model

Better model for more comprehensive tests, more convenient testing methods, more accurate parameters, and better printing results.

CHITUBOX TMA V1

Download CHITUBOX TMA V1

TIP

CHITUBOX TMA V1 is used to assist in testing the best print details

CHITUBOX TMA V1 includes the following components:

	01. Main Base Plate
	02. Möbius Ring Evolution Model
	03. Detailed Characterization Model
	04. Gadient Hole and Shaft
	05. Gradient Boss
	06. Gradient Groove
	07. LOGO Element
	08. Model Edge Sealing

Serial number	Parameters	Parameter description	Effect description
01	Main Base Plate	L (length) * W (width) = 51mm * 51mm	Assists in judging interlayer bonding capability
02	Möbius Ring Evolution Model	Interval suspended slice layers: 0-4 layers (0.025mm-0.15mm layer thickness)	Assist in judging the ability of interlayer bonding
03	Detailed Characterization Model	Different types of detailed structures	Assists in judging the printing effect of extreme detail structures
04	Gadient Hole and Shaft	Hole and shaft diameters: φ0.5, φ1, φ2, φ2.5	Assist in judging the printing effect of structural details such as holes, shafts, bosses, etc
05	Gradient Boss	Boss thicknesses: 0.1mm, 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.7mm, 0.8mm.
06	Gradient Groove	Groove sizes: 0.1mm, 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.7mm, 0.8mm.
07	LOGO Element	0.4mm cross-section width ring	Assists in judging the printing effect of large cross-section gaps
08	Model Edge Sealing	Design model edge sealing	/

CHITUBOX TMB V1

Download CHITUBOX TMB V1

TIP

CHITUBOX TMB V1 is used to assist in testing the best printing details, extreme support printing feasibility, layer gradient, wall thickness, vertical hole position, and other related printing effects.

The CHITUBOX TMB V1 model includes the following components:

	01. Main Base Plate
	02. Möbius Ring Evolution Model
	03. Detailed Characterization Model
	04. Gradient Hole and Shaft
	05. Gradient Boss
	06. Gradient Groove
	07. Logo Element
	08. Model Edge Sealing
	09. CHITUBOX Icon
	10. Inclined Dual Wings
	11. Spherical Cockpit
	12. Gradient Supports

Serial number	Parameters	Parameter description	Effect description
01	Main Base Plate	L (length) * W (width) = 51mm * 51mm	Assists in judging the deformation resistance of the printed model
02	Möbius Ring Evolution Model	Interval suspended slice layers: 0-4 layers (0.025mm-0.15mm layer thickness)	Assists in judging interlayer bonding capability
03	Detailed representation model	Various types of detailed structures	Assists in judging the printing effect of extreme detail structures
04	Gradient Hole and Shaft	Hole and shaft diameters: φ0.5, φ1, φ2, φ2.5	Assists in judging the printing effect of holes, shafts, bosses, and other detailed structures
05	Gradient Boss	Boss thicknesses: 0.1mm, 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.7mm, 0.8mm
06	Gradient Groove	Groove sizes: 0.1mm, 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.7mm, 0.8mm
07	Logo Element	Logo marking, base of the spherical cockpit	/
08	Model Edge Sealing	Design model edge sealing	Not for print evaluation, does not fully seal around to avoid creating enclosed cavity structures
09	CHITUBOX Icon	Brand logo	/
10	Inclined Dual Wings	Gradient inclined wing structure includes: wing width (6mm), transitional wall thickness (0.4mm, 0.3mm, 0.2mm), inclination angles (45°, 30°, 15°)	Assists in judging the printing effect of different inclination angles; Assists in judging the printing effect of different wall thicknesses; Assists in judging the layer transition effect of different inclination angles
11	Spherical Cockpit	Hemispherical structure with a vertical straight hole	Assists in judging the surface layer transition effect; Assists in judging whether the vertical circular hole is printed as a perfect circle
12	Gradient Supports	CHITUBOX software: heavy, medium and fine supports	Assists in judging the extreme support parameters that ensure successful printing in suspended areas (coverage area corresponds to the contact point spacing parameters of the CHITUBOX software)

Remarks: The specifications for the inclined dual wings are shown in the figure below.

CHITUBOX TMC V1

Download CHITUBOX TMC V1

TIP

Parameter information for the CHITUBOX TMC V1 model is detailed around the corresponding model.

	01. Main Base Plate
	02. Uniform Lattice
	03. Gradient Supports
	04. Gradient Hole and Shaft Fit
	05. Gradient Wall Thickness
	06. Gradient Plane Inclination
	07. Klein Bottle
	08. Gradient Hole and Shaft
	09. Gradient Inclined Cylinder
	10. CHITUBOX Icon
	11. Gradient Groove
	12. Gradient Steps

Serial number	Parameters	Parameter description	Effect description
01	Main Base Plate	L (length) * W (width) = 51mm * 51mm	Assists in judging the deformation resistance of the printed model
02	Uniform Lattice	Hexagonal grid structure with circumscribed circle φ0.5	Press the lattice to assist in judging the deformation effect of the lattice mesh structure
03	Gradient Supports	CHITUBOX software: heavy, medium, fine supports	Assists in judging the extreme support parameters that ensure successful printing in suspended areas (coverage area corresponds to the contact point spacing parameters of the CHITUBOX software)
04	Gradient Hole and Shaft Fit	Cylinder diameter: φ6; Hole radius deviation: +0.05mm, +0.025mm, 0, -0.025mm, -0.05mm	Assists in judging the optimal hole and shaft fit clearance
05	Gradient Wall Thickness	Wall thicknesses: 0.5mm, 0.4mm, 0.3mm, 0.2mm	Assists in judging the printing effect of different wall thickness structures
06	Gradient Wall Thickness	Wall thicknesses: 0.5mm, 0.4mm, 0.3mm, 0.2mm	Assists in judging the printing effect of different wall thickness structures
07	Klein Bottle	Continuous gradient curvature model
08	Gradient Hole and Shaft	Gradient hole and shaft sizes: φ0.025, φ0.5, φ1, φ3, φ5, φ10	Assists in judging the printability and dimensional accuracy of different types of hole and shaft structures
09	Gradient Inclined Cylinder	Gradient inclination angles: 0°, 15°, 30°, 45°	Assists in judging the layer transition effect of different cutting angles of curved structures; Assists in judging the sliding effect of the bottom valve structure during the transition of large and small cross-sections between layers
10	CHITUBOX Icon	CHITUBOX logo element, as a copyright marker	/
11	Gradient Groove	Groove sizes: 0.1mm, 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.7mm, 0.8mm	Assists in judging the printing ability of holes, shafts, bosses, and other detailed structures
12	Gradient Steps	Gradient step structure: 1mm, 2mm, 3mm, 4mm, 5mm, 6mm, 7mm, 8mm	Assists in judging the printing effect of different cross-wall structures